SHRIKRUPA

     MECHANICAL CALIBRATION

1. Force & Testing Machines: 

   Universal Testing Machines (UTM): Tension & Compression testing (2 N to 3000 kN) 

   Compression Testing Machines (CTM): Force measurement up to 3000 kN 

   Tensile Testing Machines (TTM): Force measurement 0.002 kN to 200 kN.​

   ​

2. Dimensional Measurements (Basic & Precision): 

   Vernier / Dial / Digital Calipers: Up to 1000 mm External Micrometers & Setting Standards: 0 mm to 175 mm Depth Gauges & Depth Micrometers: 0 mm to 300 mm Height Gauges: 0 mm to 1000 mm Profile Projector: Linear (0 mm to 150 mm), Angular (0° to 360°), Magnification (up to 50x) Coating Thickness Meters & Foils/Shims: 0.01 mm to 2.00 mm Ultrasonic & Dial Thickness Gauges: 0 mm to 300 mm Gauges & Standards: Cylindrical Measuring Pins, Feeler Gauges, Radius Gauges, Wire Gauges, Plain Snap Gauges, Thread Pitch Gauges, Tape & Scale Calibrators Scales & Tapes: Steel Scales (0 m to 2 m), Tapes/Pie Tapes (0 m to 50 m)
    

3. Angular Measurements:

   Protractors, Bevel Protractors, Combination Sets, & Inclinometers: 0° to 360°
    

4. Speed & Rotation:

   Tachometers (Contact & Non-Contact): 10 rpm to 99,000 rpm 

   RPM Indicators with Sensors: For Centrifuges, Stirrers, Stroboscopes, Vibrating & Rotating Machines (10 rpm to 99,000 rpm)
    

5. Pressure & Vacuum:

   Hydraulic Pressure Gauges / Switches / Transmitters: 0 bar to 700 bar 

   Pneumatic Pressure Gauges / Switches / Transmitters / Manometers: 0 bar to 40 bar 

   Vacuum Gauges: -0.94 bar to 0 bar
    

6. Weighing Scales & Balances:

   Precision Balances (Class I & II): Readability from 0.01 mg (up to 200 g) to 10 mg (up to 6000 g) 

   Industrial Scales (Class III & IV): Readability from 0.1 g up to 500 kg
    

7. Standard Weights:

   Class F1 & Coarser: 1 mg to 200 g 

   Class F2 & Coarser: 1 mg to 20 kg 

   Class M1 & Coarser: Up to 10 kg
    

8. Volume & Fluid Handling:

   Volumetric Glassware & Plasticware: Pipettes, Volumetric Flasks, Measuring Cylinders, Burettes, Pycnometers, Density Bottles (1 ml to 5000 ml) Piston-Operated Devices: Micropipettes (1 ul to 100 ul)
    

9. Construction & Civil Testing Equipment:

   Moulds: Cube Moulds, Beam Moulds, Cylindrical Moulds, Compaction/Proctor Moulds, CBR Moulds, Vicat Moulds, Bar Moulds, Le-Chatelier Moulds Apparatus & Accessories: Slump Cones & Tamping Rods, Test Sieves, Sand Pouring Cylinders, Core Cutters, CBR/Compaction Rammers, Liquid Limit Apparatus, Cone Penetrometer, Density Baskets/Buckets, Aggregate Impact & Crushing Testing Machines

    

   THERMAL CALIBRATION

   ​

10. Temperature Instruments:

    Liquid-in-Glass & Dial/Digital Thermometers: -40°C to 250°C 

    RTD Sensors & Thermocouples with Indicators / Data Loggers: -40°C to 1200°C
     

11. Environmental & Thermal Enclosures (Single Position Mapping):

    Ovens, Baths, Dry Baths, Autoclaves, Water Baths, BOD Incubators, Melting Point Apparatus: 0°C to 400°C High-Temperature Furnaces: 250°C to 1200°C
     

12. Humidity: Hygrometers & RH Data Loggers:

    15% RH to 95% RH (at 10°C to 50°C) Humidity Chambers & Climatic Chambers: Single-position calibration across 15% RH to 95% RH
     

    ELECTRO-TECHNICAL CALIBRATION

    ​

13. Electrical Parameters (Measure & Source): AC/DC Voltage:

    1 mV to 1000 V AC/DC Current: 0.1 mA to 1500 A (utilising current coils for high ranges) 

    Resistance (2-Wire): 1 Ohm to 90 MOhm 

    Capacitance: 1 nF to 10 uF
     

14. Temperature Simulation (Measure & Source): Thermocouples:

    Types B, E, J, K, N, R, S, and T (-200°C to 1700°C)

    RTD Simulation: Pt100 (-200°C to 600°C)
     

15. Time & Frequency: Frequency:

    45 Hz to 1000 Hz 

    Time Interval: 1 second to 28,800 seconds (8 hours)
    
    
    SERVICE CAPABILITIES

    Permanent Facility: Full scope of Mechanical, Thermal, and Electro-Technical calibration at Amravati, Maharashtra. 

    On-Site Calibration: Selected Electro-Technical, Force, Mechanical, and Thermal parameters available directly at customer locations.